<CaptureBytesWrittenByListener> |
Bytes written by listener |
Total number of packet bytes written to the reassd pipe by listend. |
<CaptureBytesWrittenByListenerPerSec> |
Bytes written by listener per second |
Rate of packet bytes written to the reassd pipe by listend per second. |
<CaptureBytesReadFromListener> |
Bytes read from listener |
Total number of packet bytes read by reassd from the reassd pipe. This number
should match with the above written by listener value, indicating that listend and reassd are in
sync and keeping up with the incoming traffic rate. |
<CaptureBytesReadFromListenerPerSec> |
Bytes read from listener per second |
Rate of packet bytes read by reassd from reassd's
pipe per second. |
<CaptureFilteredKbytesFromPrimaryInterface> |
Current filtered KB from primary interface |
Total filtered kbytes from primary interface |
<CaptureFilteredKbytesFromPrimaryInterfacePerSec> |
Current filtered KB/sec from primary interface |
Current filtered kbytes/sec from primary interface |
<CaptureFilteredKbytesFromPrimaryInterfacePerSecMax> |
Maximum filtered KB/sec from primary interface |
Maximum filtered kbytes/sec from primary interface |
<CaptureFilteredKbytesFromSecondaryInterface> |
Current filtered KB from secondary interface |
Total filtered kbytes from secondary interface |
<CaptureFilteredKbytesFromSecondaryInterfacePerSec> |
Current filtered KB/sec from secondary
interface |
Current filtered kbytes/sec from secondary interface |
<CaptureFilteredKbytesFromSecondaryInterfacePerSecMax> |
Maximum filtered KB/sec from secondary
interface |
Maximum filtered kbytes/sec from secondary interface |
<CaptureTotalPacketsRcvd> |
Total packets rcvd |
Total packet count received by pcap as reported
by its stats. |
<CapturePacketsDroppedByPcap> |
Total packets dropped by pcap |
Total packet count dropped by pcap as reported
by its stats. This value should be zero, indicating that the OS is
keeping up with the NIC interface receiving network traffic. |
<CapturePacketsDroppedInOutput> |
Packets dropped in output |
Total packets dropped by listend due to its output
buffer being full. This value should be zero, indicating listend is
keeping up with the filtered network traffic and reassd is able to
pull packets from the listend output buffer without overrunning it. |
<CaptureTotalPacketsCaptured> |
Total packets captured |
Total packet count on filtered packets received
from pcap to listend. |
<CaptureTotalPacketsCapturedPerSec> |
Total packets captured per second |
Rate of filtered packets received from pcap by
listend per second. |
<CaptureTotalIpChecksumErrors> |
Total IP checksum errors |
Total error count of IP header checksum errors. |
<CaptureTotalLargePacketsExceeded> |
Total large packets exceeded |
Total number of TCP packets whose size exceeded the configured limit.
- The TCP packet size limit for the PCA is configured in the Tuning Parameters section of the
Interface tab.
- The TCP packet size limit for the packet forwarder is configured in the
fwdr-conf.xml configuration file.
|
<CaptureCurrentFilteredKbytesPerSec> |
Current filtered kbytes per second |
Shows the current kilobytes per second traffic rate based on the filtered
capture traffic from the span ports. This statistic provides an indication of any traffic after
filtering is present and how much traffic is being processed by the Capture processes. If the span
port NIC setting is 100 mbits per second, then the maximum traffic rate that can be filtered through
is about 10,000 KB per second. These stats are updated every 5 seconds. |
<CaptureMaxFilteredKbytesPerSec> |
Maximum filtered kbytes per second |
Shows the maximum kilobytes per second traffic rate based on the filtered
capture traffic from the span ports. This statistic provides an indication of any traffic after
filtering is present and how much traffic is being processed by the Capture processes. If the span
port NIC setting is 100 mbits per second, then the maximum traffic rate that can be filtered through
is about 10,000 KB per second. These stats are updated every 5 seconds. |
<DeliveryMode> |
Delivery Mode |
Current delivery mode |
<CoreDumps Count="0" /?> |
not available |
Number of core dumps |